| 
|
Description |
| An engineering masterpiece that brings flexibility to production
machining. It's three machines in one: a wide-throat vertical, a horizontal, and a
universal for multiple-sided work, when 4th-axis or a 4th-axis Rotary Trunnion System is
added. For single set-up 5-face machining, a full 4th and 5th RTS can be added. Features
ergonomic Virtual Access® work zone that enables operators to actually "belly
up" to the work table. Fast 3 second tool change time. |
Model |
| X axis (Model V-750) |
29.5" (750 mm) |
Specifications |
| Y axis |
17.7" (450 mm) |
| Z axis |
21.7" (550 mm) |
| Spindle |
No. 50 taper, high speed, roller bearing |
| Traverse Speed |
1380"/minute (35 meters) |
| X, Y Thrust |
2200 lbs. (1000 kgf) |
| Table Load |
2750 lbs. (1250 kgf) |
| Accuracy Positioning Range
Repeatability |
+/-0.0002" (+/-0.005mm)
+/-0.00008" (+/-0.002mm) for X, Y, and Z |
| Speed |
30-8000 rpm |
| Tool Change Time |
3 seconds |
| Chip to Chip Time |
8.5 seconds |
| Tool size, maximum |
6" diameter x 12" length (150mm x 300mm) |
| Tool Storage Capacity |
22-pocket (40 optional) |
| Ballscrews |
50mm, thermally-controlled |
| Chip Disposal |
Full-enclosure chip shield with auger |
| Coolant |
High pressure (up to 1000 psi) |
|
 |
|
